A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.
Offers the longest lifetime in any environment. It has exceptional corrosion resistance, is surface tolerant and fast drying - greatly improving efficiency, It is also available in a wide range of colours.
A two pack solvent-free epoxy mastic coating, in a 14.67 litre pack. Specially designed for areas where optimum surface preparation is not possible. It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces. It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. Well suited for early immersion. It is available in grey, red and off-white, in a 14.67 litre pack with Standard Comp B.
Jotamastic Smartpack is a two-pack surface tolerant high solids epoxy primer coat for use on steel. The aluminium version includes aluminium pigment for improved barrier effect.
Jotamastic Smartpack HB is a two-pack surface tolerant high solids, high build epoxy primer coat for use on steel.
Penguard Clear Sealer is a transparent two-pack epoxy sealer with excellent waterproofing qualities.
Penguard Express is a fast drying, two-pack epoxy primer which may be applied in high film thickness and at low temperatures. Suitable for use above the waterline.
Penguard Express MIO is a fast drying, high solids, two-pack epoxy coatings which can be applied at high film thicknesses and at low temperatures. It contains micaceous iron oxide for increased barrier effect.
Penguard Express ZP is a fast drying, high solids, two-pack epoxy coating system which can be applied at high film thicknesses and at lower temperatures.
Penguard FC is a high build, two-pack epoxy coating that can be used as a topcoat in an epoxy paint system or as a single coat system on steel and concrete.
Penguard HB is a high build, two-pack pure epoxy primer. It is ideal for application on GRP or gelcoat as it provides excellent waterproofing and will help prevent osmosis.
Penguard HSP is a fast drying, high solids two-pack epoxy coating. Penguard HSP provides corrosion protection to steel in an urban and industrial atmosphere.
Penguard Low Temperature Additive is an additive that will assist drying and curing of Penguard paints at low temperatures (down to 2ºC).
Penguard Primer is a high-molecular-weight epoxy primer for new construction. It can be used as a primer as part of a complete system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
A surface tolerant epoxy primer for use on steel above and below the waterline. Use as a first coat on prepared steel.