Search

Product categories

Advice

We only sell products we know about and believe in.

Prices

Trade prices on all products, recently manufactured and in stock.

Delivery

Clear despatch times and next day delivery to most of the UK.

Service

We supply data sheets and application guides with every order.

CLEARANCE

These items are reduced in price for quick sale. They may be end-of-lines, out of date, damaged or ordered by mistake. There will be limited stock of most clearance items. Please read the description of the product for full details.

IF YOU WISH TO ORDER CLEARANCE ITEMS OR HAVE ANY QUESTIONS CALL US ON:

01285 862132

Primers

TO
CLEAR

Jotun's highest specification zinc rich epoxy primer, containing 90% zinc. Barrier 90 may be used as a first coat on blast cleaned steel. The steel must be prepared to SA2.5 using dry blasting (not water jetting). Barrier can be overcoated in 2 hours at 10°C. 8 packs are available at this exceptional price, as the tins are past the best before date.

From £95.00

10%
Off!

Jotacote Universal is a high build, abrasion resistant two-pack epoxy primer that can be applied at high film thickness. It can be used both as a primer and finish coat.

From £134.95

Topcoats/varnish

Over
30% OFF!

Hardtop CA in Base six so can be tinted to various oranges. Available for £54+vat per pack!

From £54.00

15%
off!

Hardtop HB is a satin finish two pack polyurethane topcoat with excellent colour retention. 1 x 5L pack available in Jotun 139 Blue - £46.70+vat.

From £46.70

70%
Off

Hardtop Pro is an isocyanate-free acrylic polysiloxane coating giving a high gloss finish. It offers excellent gloss & colour retention, very good chemical resistance, and easier application with brush & roller. It is a high solids topcoat (65%), and cures down to 0º C.

From £29.95

55%
Off

3 x 5 litre packs Penguard Topcoat in various Oranges. Now past 'best before' date, so available for just £30 + VAT per pack.

From £35.00

50%
off

An advanced waterborne acrylic emulsion coating for both interior & exterior use. It is fast-drying, and can be applied down to 10° C. It has a gloss finish, with very good gloss retention. It is certified not to spread surface flames, & meets the LEED v4 requirements for VOC content & emissions.

From £24.95

Accessories

Various 1L bottles & 5L tins of solvent that can be used to clean pumps and tools before and after painting.

From £5.00

To
Clear

Disposable coveralls available in three different sizes.

From £6.00

To
Clear

Multi purpose, fold flat design. Approved to EN149:2001 FFP3, assigned protection factor 20. Pack of 2.

From £2.00

20%
OFF

Masonry Roller & Brush kit comprising: Masonry roller & frame Masonry brush 11" heavy duty plastic tray

From £6.95

 

What our customers say

I was delighted with your service and am in the process of placing another order i paint boats for a living haven’t had the pleasure of using your product but found it easy to use. - Brian Wholey - Lancashire
Recently used SML to order paint for my dutch barge. All the staff were very helpful and knowledgeable about products. They even managed to get a package sent out to me next day when I had come up short on thinners at the end of a long day spraying. I will definitely order paints from here in future. - Christopher French
Thank you for the exemplary service, the paint tins were so well packed, and the surprise Document Pack, was very helpful. That, combined with very swift delivery, was most impressive - D G & B L Lewis - Cardiff
I used your SHIELD Surface Tolerant Primer and am hugely impressed with the results - this is by far the best result I've had out of many different paints I've tried for this task! The performance is all the more remarkable since the keels sink into highly abrasive harbour mud every low tide, which scours most coatings off. - Mark Hartswood - Scottish Borders
Many thanks for a wonderful service which would be hard to equal, I have never felt more confident in using your company - Thank you - John Parkin - Mexborough
Great marine paints. - James Crompton
If you require anti fouling paints - Go no where else! I have used all the leading antifoul manufacturers paints over 30 years. CU-PRO is the best on the market, does the best job and even cheaper than most of the others. SML are a quality company and with the best products. - David Rosser
Hello guys, the customer service I received when I was calling for advice really was excellent, I'll be recommending you to all my fellow boaters - Richard Sergejev - Hertfordshire
My boat went back in the water today! I would like to thank SML for the great service you provided, both over the phone, super quick delivery, but above all an excellent product. The boat looks great - Steve Duffy - Staines
Excellent Company. Very good knowledge of products and can't do enough for you. I have used this company for around 10 years. - Joseph Wiggins
We are very impressed with the CU-PRO anti fouling. Just dried out the yacht after 14 months continuous immersion and the anti fouling had repelled growth very well, delighted with the anti fouling’s performance and will be re-coating with CU-PRO before re launch in spring next year. - Ian Binnie - Argyll
Couldn't be more helpful and professional. The best paint company I've ever used. - Glosstock Sales
Helpful, professional and know their products. - John Richards
Just a quick note to say how pleased I am with your products. I have just completed painting my boat and I am thrilled with the result. Excellent product and service – cheers - Adrian Mickleson - East Molesey
Your website is imho, one of the best in the business. Great products, advice and all the ancillaries needed to get a first rate result, delivered swiftly at a very fair price indeed. Tops! - Tim Allen - East Sussex
Brochures

Brochures
Helpful guides

Helpful guides
Clearance offers

Clearance offers