01285 862132
Call us with any queries you may have about our products or services
Advice
We only sell products we know about and believe in.
Price
Trade prices on all products, recently manufactured and in stock.
Delivery
Clear despatch times and next day delivery to most of the UK.
Featured Products
JOTUN
AlkydPrimer

Alkyd Primer is a single pack oil based primer/undercoat for use on steel, wood and aluminium surfaces where Pilot II is the desired finish coat. It can also be used as a topcoat when a matt finish is required.

JOTUN
Conseal Touch-Up

Conseal Touch-Up is a single pack, high build acrylic self-priming topcoat which can be applied directly onto steel.

JOTUN
Hardtop AS

Hardtop AS has been discontinued and replaced by the superior Hardtop AX.

JOTUN
Hardtop Flexi

Jotun Hardtop Flexi is a high solids, glossy two-pack polyurethane topcoat with good gloss and colour retention and excellent flexibility. Hardtop Flexi also has excellent impact resistance.

JOTUN
Hardtop HB

Hardtop HB is a matt finish two pack polyurethane topcoat with excellent colour retention.

JOTUN
Hardtop XP

Hardtop XP is a high volume solids, glossy two-pack polyurethane topcoat with excellent gloss and colour retention.

JOTUN
Jotamastic 80

Excellent protection in less severe environments - Low film thickness version of Jotamastic 87. Available in off white, grey, black and red and with the inclusion of aluminium flakes in Aluminium and Aluminium red toned.

JOTUN
Jotamastic 87 AL

This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. It is aluminium pigmented for improved barrier effect.

JOTUN
Jotamastic 87

This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired.

This is a rough guide only. The amount of paint required is based on average conditions and application methods. Please check the individual product spreading rates and application guides if you require more precise information. You may need to change the Product type for each area you wish to paint i.e. the amount of paint required for a given area is not a combined total of primer and antifouling but the amount required of each product. The protection factor for all primers and antifouling is two coats for ‘good’ and three coats for ‘best’. The amount of paint applied with each coat varies considerably on the method of application so this is just a rough guide.

To work out a basic area, a cube or a cylinder use the Paint Area Calculator HERE.


Jotun Main Distributors
Card Payment Logos