These kits contain everything you will need to apply a two-pack epoxy coating with up to 15 years protection. We have calculated how much paint you will need for two coats for the area specified. PLEASE NOTE: The steel you are painting will need to be blasted to SA 2.5 or hand prepared to ST2 prior to the application of a two-pack paint system. Purchasing of one of these kits will also allow you a 10% discount on any SML Lustre topcoats.
This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. It is a fast drying, high solids, high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944-5. It provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. This product complies with ASTM D520 type II zinc dust.
These kits contain everything you will need to fully paint or touch-up a coating with Conseal Touch-Up. Conseal can be applied over previous coatings or to bare steel as a "one-coat" combined primer and topcoat.
PLEASE NOTE: The plant colours can vary from country to country and there may be multiple versions. The one we have selected for this pack is the one most generally used for the manufacturer in the UK. Colours can also fade and darken depending on the machines age and use. If you need to match the colour of your plant more accurately you will need to contact us and supply a sample.
Caterpillar® Yellow Paint In Factory Colour Or Matched To Your Machinery. Everything you need to repair the paintwork for any Caterpillar® Plant.
Ford® Tractor Blue Paint In Factory Colour Or Matched To Your Machinery. Everything you need to repair the paintwork for any Ford® Tractor.
Hitachi® Orange Paint In Factory Colour Or Matched To Your Machinery. Everything you need to repair the paintwork for any Hitachi® Plant.
JCB® Yellow Paint In Factory Colour Or Matched To Your Machinery. Everything you need to repair the paintwork for any JCB® Plant.
John Deere® Green Plant Touch-Up Kit. In Factory Colour Or Matched To Your Machinery. Everything you need to repair the paintwork for any John Deere® Plant.
Massey Ferguson® Red Plant Touch-Up Kit. In Factory Colour Or Matched To Your Machinery. Everything you need to repair the paintwork for any Massey Ferguson® Plant.
CU-PRO is an advanced antifouling product developed here at SML Marine Paints. It is a premium self-polishing antifouling with a commercial grade biocide to give improved performance, fuel economy and a service interval of up to three years.
STRIPPIT antifouling remover has been designed to remove old antifouling from GRP & wooden craft with the minimum of effort without damaging the gel coat or epoxy coatings. (Do not use on bare timber). It is effective on most types of self polishing and leaching antifouling, but not two-pack paints or hard antifoul paints.
A kit containing 1 x Vinyl Primer Spray and 1 x Aqualine Spray.