Replaced with Jotamastic Smartpack HB - Click here to order.
Jotmastic Smartpack is designed to be applied by brush or roller. The first coat should be brushed.
For use as an anticorrosive touch-up coating for steel structures where small repairs are required and spray application is not practical. The aluminium version includes aluminium pigment for improved barrier effect.
It is easy to mix small quantities which minimises waste and can be applied on surfaces with lower quality surface preparation. Jotmastic Smartpack can be used alone or in combination with single or two-pack topcoats. It must be applied and allowed to cure at temperatures over 10°C.
Feature | Details |
---|---|
Water Resistance | Very Good |
Thinner | Jotun Thinners No. 17 or SML Epoxy Thinner |
Solvent Resistance | Good |
Pot life @ 23°C | 1.5 hours maximum |
No. of recommended coats | 3 |
Dry to re-coat time @ 23°C | 7 hours |
Curing time @ 23°C | 7 days |
Coverage | 9 m² per litre |
Chemical Resistance | Good |
Application method | Brush, roller or high pressure airless spray |
Thinners No. 17 is the solvent base for Jotun's Jotamastic and Penguard range. Available in 5L & 20L sizes
Jotun Pioner Topcoat is a single pack, semi-gloss, acrylic topcoat which is suitable for use both above and below the waterline.
A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll, however best results will be achieved from a spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.
Hardtop CA is a discontinued product. It's relacement is Jotatop Pro which is also isocyanate free.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Antifouling, single & 2 pack Primers.