Jotun Penguard HSP is a fast drying, high solids two-pack epoxy coating designed to provide corrosion protection to steel in an urban and industrial atmosphere.
Penguard HSP is ideal for use where a fast dry-to-recoat and/or a fast dry-to-handle time is required.
Available in 20 litre pack only.
Recommended topcoats:
Standard: Penguard Topcoat
Premium: Hardtop AX
Eco: Hardtop CA
Other topcoat options available. Please call us for advice.
Feature | Details |
---|---|
Water resistance: | Very good |
Thinner: | Jotun No 17 |
Solvent resistance: | Excellent |
Pot life @ 23 C | 2 hours |
Flexibility: | Good |
Drying time @ 23 C: | Through dry in 3 hours |
Curing time @23 C | 4 days |
Coverage: | Typical 5.6 sq metres per litre |
Application method: | Airless spray, brush recommended for stripe coating & small areas, care must be taken to achieve the desired dry film thickness. |
To order this product, please call us on 01285 300150 or complete the form below and we'll get in touch:
Call us on 01285 862132
Thinners No. 17 is the solvent base for Jotun's Jotamastic and Penguard range. Available in 5L & 20L sizes
Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.
A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll, however best results will be achieved from a spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.
Hardtop CA is a two component cross linked acrylic coating. The product does not contain isocyanates. It has a gloss finish with good gloss retention.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Antifouling, single & 2 pack Primers.