We only sell products we know about and believe in.
Trade prices on all products, recently manufactured and in stock.
Clear despatch times and next day delivery to most of the UK.
We supply data sheets and application guides with every order.
Primers are organised below into the popular SHIELD range followed by Jotamastic, single and two-pack categories. As a general rule the single pack paints tend to be less expensive and easier to use but don't provide the same level of protection as the two-pack equivalents. Marine primers are used to protect steel, wood, aluminium, concrete and GRP above and/or below the waterline or in splash zones.
For more information on which Jotun primer to use visit our marine paint guide.
The best way to ensure primers are applied in the required thicknesses and with the correct number of coats is to use a Wet Film Gauge and to use different colours between coats (so you can see where you have been). However, if you are only ordering one tin of primer, we can now supply some tint that you can use to change the colour of your primer to differentiate between coats.
A two pack solvent-free epoxy mastic coating, specially designed for areas where optimum surface preparation is not possible. It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces. It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. Well suited for early immersion. It is available in grey, red and off-white, in a 14.67 litre pack with Standard Comp B. We recommend the Wintergrade (16L) version if painting outside between September & April.
Jotamastic Smartpack Aluminium is a two-pack surface tolerant high solids epoxy primer coat with Aluminium pigment for improved barrier effect, for use on steel & other substrates. Specially designed for application by brush & roller, 1-1 mixing ratio for easy use & reduced wastage, & ideal for areas where optimum surface preparation is not possible. Can be used as primer, mid or finish coat, & is suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete & other substrates. 10 litre pack.