This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build
product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides
long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as
single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and
aged coating surfaces. It can be applied at sub zero surface temperatures.
| Feature | Details |
|---|---|
| Water Resistance | Excellent |
| Thinner | Jotun Thinners No. 17 or SML Epoxy Thinner |
| Solvent Resistance | Very Good |
| Pot life @ 23°C | 2 hours |
| No. of recommended coats | 3 |
| Dry to re-coat @ 23°C | 6 hours |
| Curing time @ 23°C | 7 days |
| Coverage | 6 to 8 m² per litre |
| Chemical Resistance | Good |
| Application method | Brush, roller or high pressure airless spray |
Thinners No. 17 is the solvent base for Jotun's Jotamastic and Penguard range. Available in 5L & 20L sizes
Jotun Pioner Topcoat is a single pack, semi-gloss, acrylic topcoat which is suitable for use both above and below the waterline.
A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll, however best results will be achieved from a spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.
A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Antifouling, single & 2 pack Primers.
Follow us on:
Use the form below or send an email to info@smlpaints.co.uk
