This is a great value for money kit, containing all you need.
5 litres of CU-PRO Premium Antifouling
2.5 litres of SHIELD Underwater Primer
1 litre of CU-PRO Thinner
Free drillbit stirrer!
CU-PRO is an avanced antifouling product developed here at SML Marine Paints. It is a premium self-polishing antifouling with a commercial grade level of biocide to give improved performance, fuel economy and a service interval of up to three years.
CU-PRO is Ideal for yachts and leisure boats in regular use at speeds up to 30 knots. Suitable for use on GRP, wood, steel and ferro cement (not suitable for aluminium hulls).
Feature | Details |
---|---|
Time to relaunch @ 23°C | 15 hours |
Time to recoat @ 23°C | 10 hours |
Thinner | CU-PRO thinner |
CU-PRO no. of recommended coats | 2 |
CU-PRO coverage | 10 m² per litre |
CU-PRO application method | Brush, roller, conventional air spray, or high pressure airless spray |
STRIPPIT antifouling remover has been designed to remove old antifouling from GRP & wooden craft with the minimum of effort without damaging the gel coat or epoxy coatings. (Do not use on bare timber). It is effective on most types of self polishing and leaching antifouling.
A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Antifouling, single & 2 pack Primers.
Plastic roller trays that are available in 4", 9" and 11" sizes. The 11" roller tray is heavy duty, reusable and suitable for use with larger rollers and when painting larger areas.