Vinyguard Silvergrey is a quick drying, modified vinyl primer, recommended as a tie coat or as a sealer for an antifouling system. Can also be used as a primer / touch up primer under alkyd and acrylic coatings. It is very water resistant and is excellent above and below the waterline as part of a single pack paint system.
It is also suitable for use as a tie coat between an epoxy primer and antifouling, or for use as a barrier/sealer coat between unsound/unknown or incompatible antifoulings.
Vinyguard can also be used as a sealer coat over existing paint prior to the application of a new topcoat. It is excellent as a primer/touch-up primer under Pilot 2 on wood & steel.
Available in 5 litre & 20 litre sizes.
Feature | Details |
---|---|
Touch Dry @ 23°C | 30 minutes |
Thinner: | Jotun No 7 or SML Xylene thinners |
Recommended coats: | 1 coat - tie-coat/sealer coat under antifouling, 2 coats - above waterline, 4-5 coats - bare substrate below waterline |
Dry to re-coat @ 23°C | 2 hours |
Coverage: | 8m² per litre |
Application method: | Conventional or airless spray, brush & roller recommended for small areas and stripe coating. |
Thinners No. 7 is the solvent for xylene based paints and coatings. Available in 5L & 20L sizes.
Self-polishing antifouling for vessels operating in global trade, offering up to 60 months protection on flat bottom, sides and boottop, with high performance biocides and low leached layer. Recommended for vessels trading at high speed (over 18 knots) and high frequency.
Premium self-polishing antifouling with a commercial grade biocide to give service interval of up to three years.
Offers the longest lifetime in any environment. It has exceptional corrosion resistance, is surface tolerant and fast drying - greatly improving efficiency, It is also available in a wide range of colours.
Penguard HB is a high build, two-pack pure epoxy primer. It is ideal for application on GRP or gelcoat as it provides excellent waterproofing and will help prevent osmosis.
Pilot II is a glossy, single pack oil based topcoat for use above the waterline. Over a suitable primer it can be used on steel, wood or GRP.