CU-PRO is an advanced antifouling product developed here at SML Marine Paints. It is a premium self-polishing antifouling with a commercial grade biocide to give improved performance, fuel economy and a service interval of up to three years.
CU-PRO is Ideal for yachts and leisure boats in regular use at speeds up to 30 knots. Suitable for use on GRP, wood, steel and ferro cement (not suitable for aluminium hulls).
The Platinum White colour has a unique silvery/mauve appearence.
**Receive a FREE drillbit stirrer when you order two or more tins**
After 18+ months in the water with the original CuPro, the thin slime coating washed off easily with no other fouling present at all, leaving the original CuPro in good shape (probably ready for another season at least). I'm planning to haul out again in 2 years and don't expect any problems using this anti-fouling paint - Mr Ashton,
Over recent years I have relied upon your company to supply the antifouling paint for my elderly steel hulled boat which lives in the Mediterranean. I am writing this short note to tell you that your own Cu Pro antifouling is simply the best I have ever used. To coin a phrase from another well known fence paint supplier “it simply does what it says on the tin”. It goes on well giving a good finish and even at the higher sea temperatures of the Mediterranean shows very little weed growth even on a boat which is possibly too slow to make the best of its self polishing properties. Had this product been available when I ran my own boat building company it would most certainly have been our preferred product. - Kind regards - Richard Oddie - Nottinghamshire
Three years ago you supplied CU-PRO Antifouling (3 year coverage), well the yacht was lifted out this week after nearly 3 years in. WOW could not believe how good the bottom was after a quick power wash - one happy happy customer with the super antifouling quality. - Mr McLeman - Dumfries & Galloway
| Feature | Details |
|---|---|
| Time to relaunch @ 23°C | 15 hours |
| Time to recoat @ 23°C | 10 hours |
| Thinners | SML CU-PRO thinner |
| No. of recommended coats | 2 |
| Coverage | 10 m² per litre |
| Application method | Brush, roller, conventional air spray or high pressure airless spray |
STRIPPIT antifouling remover has been designed to remove old antifouling from GRP & wooden craft with the minimum of effort without damaging the gel coat or epoxy coatings. (Do not use on bare timber). It is effective on most types of self polishing and leaching antifouling, but not two-pack paints or hard antifoul paints.
CU-PRO Thinner is formulated for use with CU-PRO Premium Antifouling and with SHIELD Underwater Primer.
SHIELD Underwater Primer is a specially formulated primer for use below the waterline under CU-PRO Premium Antifouling. It can also be used to seal over existing antifouling or direct to GRP, aluminum, steel, wood or ferro cement.
A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.
CU-PRO is an advanced antifouling product developed here at SML Marine Paints. It is a premium self-polishing antifouling with a commercial grade biocide to give improved performance, fuel economy and a service interval of up to three years.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Antifouling, single & 2 pack Primers.
Follow us on:
Use the form below or send an email to info@smlpaints.co.uk
