Finishing Filler is a high-density, hand-applied two-component epoxy filler that leaves a smooth, strong and sandable surface. It has good resistance to water and solvents, has very strong cohesion/adhesion properties and is more flexible than most epoxy filler. Although it has a low absorption degree of water or humidity, it is necessary to seal the filler with an epoxy coating. It is suitable as a filler system in osmosis treatments and repairs.
Note: Finishing Filler has a much lower viscosity than Lightweight Filler.
Feature | Details |
---|---|
Drying time @ 23°C | 14 hours |
Curing time @ 23°C | 7 days |
Coverage | 1 m² per litre |
Cleaner | Thinners No. 17 |
Application method | Trowel, pallet knife etc. |
Call us on 01285 862132
Thinners No. 17 is the solvent base for Jotun's Jotamastic and Penguard range. Available in 5L & 20L sizes
A plastic container available in 1.1L or 2.5L sizes for mixing small quantities of two-pack paints.
Pack of 4 flexible steel blades with plastic handles for small mixing and filling jobs. Pack contains one each of the following 120mm, 100mm, 80mm and 50mm wide blades.
Fine finishing abrasive paper that is ideal for wet or dry sanding. Paper contains anti-clogging agent, which increases useful life. Grit particles are uniform in size, virtually eliminating sanding scratches. Perfect for topcoats & varnishes. Each roll is 115mm wide and 5m long.
High Tech masking tape developed to give excellent barrier properties, eliminating paint bleed to ensure the ultimate in sharp paint lines and guaranteeing a professional finish every time. Suitable for use on delicate surfaces - always try a small area first. Available in 1", 1.5" and 2" widths.
Paint Stirrers, Mixing Sticks, Paste Mixing Sticks. Material: 100% certified beech wood