A two pack solvent-free epoxy mastic coating, in a 14.67 litre pack. Specially designed for areas where optimum surface preparation is not possible. It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces. It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. Well suited for early immersion. It is available in grey, red and off-white, in a 14.67 litre pack with Standard Comp B.
Ballast tanks
This tool should be used as a guide only. Jotamastic SF 14.67L may not be an exact match for Sigmaprime 1000 by PPG Protective & Marine Coatings but we have given the closest match we can. Jotamastic SF 14.67L should do the same job and have similar properties but you should always read the technical data sheets for both Jotamastic SF 14.67L and PPG Protective & Marine Coatings Sigmaprime 1000 to be sure. Please see any notes to see any major differences and call us on 01285 862 132 if you have any specific questions.