A surface tolerant epoxy primer for use as a first coat on mild steel above and below the waterline. "Surface tolerant" means the paint gives better levels of corrosion protection than other epoxies if preparation standards are lower. This makes it ideal for use in situations where grit blasting is not possible.
Contains aluminium flake which further improves the barrier effect. Specially formulated for brush/roller application. The low solvent content results in a thicker coating for given spreading rate, when compared to other paints.
Aluminium/grey colour.
Recommended topcoats:
Standard: Lustre Gloss Silicone Alkyd
Premium: Lustre Gloss Polyurethane
Other topcoat options available. Please call us for advice.
Feature | Details |
---|---|
Touch dry @20º C | 3 hours |
Thinners | SML Brushing Thinners |
No. of recommended coats | 2 |
Dry to re-coat @20º C | 8 hours |
Coverage | 6 to 8m² per litre |
Application | Brush, roller, or airless spray |
Specially formulated for use with SHIELD - Surface Tolerant Epoxy Primer and SHIELD - Quick Dry Spot Primer.
A 2-pack Polyurethane topcoat that keeps its colour & gloss for up to 10 years between re-coats.
Easy to apply, high gloss topcoat with excellent durability and colour retention.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Antifouling, single & 2 pack Primers.
No bristle loss. High performance with all paints and varnishes. Easier to clean synthetic bristles. Soft grip handle for greater comfort and control.