Order in the next
17 hours 35 minutesfor dispatch tomorrow
Advice
We only sell products we know about and believe in.
Prices
Trade prices on all products, recently manufactured and in stock.
Delivery
Clear despatch times and next day delivery to most of the UK.
Service
We supply data sheets and application guides with every order.
Penguard HB
Penguard HB is a high build, two-pack pure epoxy primer. It has excellent adhesion to GRP and should be used when painting over the gelcoat for the first time. It is extremely water resistant and will help prevent osmosis. It also has excellent adhesion to aluminium, bronze and galvanised steel.
It adheres well to concrete and makes an excellent swimming pool paint when correctly applied directly on a rendered surface. It can also be used in tanks for potable water providing the correct guidelines are followed.
Available in 5 litre & 20 litre pack sizes.
Note: Use Penguard Low Temperature Additive to enable curing at temperatures below 10°C.
Specification
Guides
Data SheetSuitability
Above WaterProduct features
- GRP/gelcoat, steel, aluminium & galvanised
- Above & below the waterline
- High build
Choose colour first. Any size options will then be available.
You may also be interested in:
Thinners No. 17
Thinners No. 17 is the solvent base for Jotun's Jotamastic and Penguard range. Available in 5L & 20L sizes
From £19.95
Penguard LT Additive
Penguard Low Temperature Additive is an additive that will assist drying and curing of Penguard paints at low temperatures (down to 2ºC).
From £4.25
Epoxy Thinner
SML Epoxy Thinner is ideal for use with most two-pack epoxy primers and topcoats.
From £6.95
SML 4" Blue Stripe Roller
5 or 10 pack. Thermobonded and solvent resistant for reduced fibre shedding. Core - 6mm Pile - 13mm Fabric - Nylon Ideal uses - Antifouling, Epoxy resin,floor & solvent based paints
From £4.00
.gif)
- Site Map
- |
- Terms and Conditions
- |
- Copyright © 2017 SML Marine Paints. All Rights Reserved.