SHIELD Underwater Primer is a specially formulated primer for use below the waterline under CU-PRO Premium Antifouling.
It can also be used to seal over existing antifouling or direct to GRP, aluminum, steel, wood or ferro cement.
SHIELD Underwater Primer was previously known as CU-Pro Primer.
Grey in colour.
| Feature | Details |
|---|---|
| Thinner | SML CU-PRO thinner |
| Overcoating time | 8 hours at 23° C |
| No. of recommended coats | 1 or 2 |
| Drying time | Touch dry in 30 minutes at 23° C |
| Coverage | 8 - 10 m² per litre |
| Application | Brush, roller, or airless spray |
Premium self-polishing antifouling with a commercial grade biocide to give service interval of up to three years.
CU-PRO Thinner is formulated for use with CU-PRO Premium Antifouling and with SHIELD Underwater Primer.
A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.
Thermobonded and solvent resistant for reduced fibre shedding. Available in various lengths and pack sizes. Ideal uses - Antifouling, single & 2 pack Primers.
Follow us on:
Use the form below or send an email to info@smlpaints.co.uk
