Order in the next
5 hours 5 minutesfor dispatch tomorrow
Advice
We only sell products we know about and believe in.
Prices
Trade prices on all products, recently manufactured and in stock.
Delivery
Clear despatch times and next day delivery to most of the UK.
Service
We supply data sheets and application guides with every order.
Jotamastic 87
To be applied directly to steel surfaces where good standards of surface preparation (min ST2.0) have been possible. Jotamastic 87 can be used alone or in combination with single pack (not Pilot II) or two-pack topcoats.
In certain situations, Jotamastic 87 may also be used as a primer over single pack paint systems prior to applying a two-pack topcoat. Please contact us for further information. Jotamastic 87 gives excellent corrosion protection both in salt and fresh water. Applied at the correct film thickness to properly prepared steel, it is able to prevent corrosion for up to 15 years.
For increased film thickness and ultimate corrosion protection use the aluminium or aluminium redtone version.
Note: Pack size with Standard hardener is 4.7 litres and 18.7 litres.
Recommended topcoats:
Standard: Conseal Touch-Up
Premium: Hardtop AX
Eco: Hardtop CA
Other topcoat options available. Please call us for advice.
Specification
Guides
BrochureSuitability
Above WaterProduct features
- Surface tolerant
- Corrosion protection for up to 15 years on properly prepared steel
- Use at temperatures above 10°C
- Excellent water resistance
Choose colour first. Any size options will then be available.
You may also be interested in:
Thinners No. 17
Thinners No. 17 is the solvent base for Jotun's Jotamastic and Penguard range. Available in 5L & 20L sizes
From £24.50
Epoxy Thinner
SML Epoxy Thinner is ideal for use with most two-pack epoxy primers and topcoats.
From £9.50
20%
OFF
SML PPE Pack
Personal Protection Equipment Pack containing coveralls, goggles, respirators and gloves. Special offer - a saving of £4.40 off the price of the products if brought separately.
From £10.00
Wet Film Gauge
For measuring wet film thickness of paints, varnishes, antifouling and many other wet coatings that are sprayed, dipped or brushed on a smooth surface. Tricomb Wet Film Gauges are not calibrated and should only be relied on to give an indication of film thickness.
From £0.75
.gif)
- Site Map
- |
- Terms and Conditions
- |
- Copyright © 2019 SML Marine Paints. All Rights Reserved.
What our customers say