Product categories

Advice

We only sell products we know about and believe in.

Prices

Trade prices on all products, recently manufactured and in stock.

Delivery

Clear despatch times and next day delivery to most of the UK.

Service

We supply data sheets and application guides with every order.

Red (Jotun)

The following Jotun products are available in Red .

Steel Touch-Up kit for up to 40m2 area

From £101.00

Steel Touch-Up kit for up to 60m2 area

From £149.00

Alkydprimer is a single pack oil based primer/undercoat for use on steel, wood and aluminium surfaces where Pilot II is the desired finish coat. It can also be used as a topcoat when a matt finish is required.

From £29.95

Conseal Touch-Up is a single pack, high build acrylic self-priming topcoat which can be applied directly onto steel.

From £36.50

A 2-pack Polyurethane topcoat that keeps its colour & gloss for up to 10 years between re-coats.

From £24.50

Easy to apply, high gloss topcoat with excellent durability and colour retention.

From £20.50

Hardtop AS has been discontinued and replaced by the superior Hardtop AX.

Call for prices

A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.

From £64.50

A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.

From £64.50

Jotun Hardtop Flexi is a high solids, glossy two-pack polyurethane topcoat with good gloss and colour retention and excellent flexibility. Hardtop Flexi also has excellent impact resistance.

From £53.95

Hardtop HB is a satin finish two pack polyurethane topcoat with excellent colour retention.

From £45.00

Hardtop Smart Pack is a two component durable topcoat that combines excellent application properties by brush and roller with a 1:1 mixing ratio, simplifying application

From £99.75

Hardtop XP is a high volume solids, glossy two-pack polyurethane topcoat with excellent gloss and colour retention.

From £53.95

A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.

From £30.60

Jotacote Universal is a high build, abrasion resistant two-pack epoxy primer that can be applied at high film thickness. It can be used both as a primer and finish coat. NOW REPLACED BY JOTACOTE UNIVERSAL N10.

Call for prices

A quick drying, single pack paint suitable for use on exterior decking. Jotafloor Rapid Dry provides a hard-wearing and gloss/semi gloss finish.

From £37.80

Wintergrade version for application below 10°C and faster curing times in normal conditions.

From £49.95

For severe environments and long lifetime. The original market leader in epoxy mastic technology. Available in off white, grey, black and red and with the inclusion of aluminium flakes in Aluminium and Aluminium red-toned.

From £56.75

Wintergrade version for application below 10°C and faster curing times in normal conditions.

From £56.75

Offers the longest lifetime in any environment. It has exceptional corrosion resistance, is surface tolerant and fast drying - greatly improving efficiency, It is also available in a wide range of colours.

From £59.50

Wintergrade version for application below 10°C and faster curing times in normal conditions.

From £59.50

A two pack solvent-free epoxy mastic coating, in a 14.67 litre pack. Specially designed for areas where optimum surface preparation is not possible. It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces. It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. Well suited for early immersion. It is available in grey, red and off-white, in a 14.67 litre pack with Standard Comp B.

From £219.95

Jotamastic Smartpack is a two-pack surface tolerant high solids epoxy primer coat for use on steel. The aluminium version includes aluminium pigment for improved barrier effect.

From £99.95

Easy to apply, low sheen topcoat with excellent durability and colour retention.

From £20.50

Single pack polyurethane marine deck paint.

From £30.75

Penguard Express ZP is a fast drying, high solids, two-pack epoxy coating system which can be applied at high film thicknesses and at lower temperatures.

From £47.25

Penguard FC is a high build, two-pack epoxy coating that can be used as a topcoat in an epoxy paint system or as a single coat system on steel and concrete.

From £47.25

Penguard HB is a high build, two-pack pure epoxy primer. It is ideal for application on GRP or gelcoat as it provides excellent waterproofing and will help prevent osmosis.

From £48.95

A two-pack epoxy primer certified not to spread surface flame. It should be used as a first coat on aluminium and galvanised steel to ensure good paint adhesion. Available in 5 litre & 20 litre packs, including hardener.

From £44.95

Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.

From £57.50

Pilot ACR is a high build, quick drying acrylic topcoat. It can be applied as a single coat system or over a suitable primer and at temperatures as low as minus 15°C.

From £53.95

Pilot II is a glossy, single pack oil based topcoat for use above the waterline. Over a suitable primer it can be used on steel, wood or GRP.

From £36.75

Pilot QD Primer is a single pack, fast drying alkyd based primer with zinc phosphate as an active corrosion preventing pigment. It is for use above the waterline on steel or aluminium structures in moderate non-aggressive environments.

From £26.75

An advanced waterborne acrylic emulsion coating for both interior & exterior use. It is fast-drying, and can be applied down to 10° C. It has a gloss finish, with very good gloss retention. It is certified not to spread surface flames, & meets the LEED v4 requirements for VOC content & emissions.

From £53.95

Jotun Pioner Topcoat is a single pack, semi-gloss, acrylic topcoat which is suitable for use both above and below the waterline.

From £30.00

A 2-pack Polyurethane topcoat that keeps its colour for up to 10 years between re-coats.

From £24.50

A two-pack polyamine cured novolac epoxy tank lining with excellent chemical resistance. It can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, and concrete substrates. Typical use: As internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Can be used in pressure vessels. This coating has very good resistance to high temperature products. Available in Light Grey, Light Red and Red, in 18.8 L packs. Note; Colours are approximations and are not matched. Slight batch deviations will be observed.

From £190.00

Ultra Topcoat has been discontinued. An alternative product is Pilot ll.

Call for prices

A single pack primer with good adhesion to steel, aluminium and wood. Can be used as a matt topcoat. 2.5L pack size.

From £25.95

WaterFine Topcoat has been discontinued. An alternative product is Pilot WF.

Call for prices

 

What our customers say