Product categories

Advice

We only sell products we know about and believe in.

Prices

Trade prices on all products, recently manufactured and in stock.

Delivery

Clear despatch times and next day delivery to most of the UK.

Service

We supply data sheets and application guides with every order.

Grey (Jotun)

The following Jotun products are available in Grey .

Steel Touch-Up kit for up to 40m2 area

From £101.00

Steel Touch-Up kit for up to 60m2 area

From £149.00

Barrier is a two-pack, zinc rich, epoxy primer. Barrier is used in combination with other primers to further improve corrosion protection. Total zinc content = 86%.

From £88.75

Conseal Touch-Up is a single pack, high build acrylic self-priming topcoat which can be applied directly onto steel.

From £36.50

A glossy topcoat, with good levelling characteristics. Easy to apply by brush & roller. Good gloss & colour retention. Available in 0.75 L only.

From £16.95

A traditional alkyd primer, EasyPrimer offers good filling & levelling properties. Available in White or Grey, in 0.75L.

From £14.25

A 2-pack Polyurethane topcoat that keeps its colour & gloss for up to 10 years between re-coats.

From £24.50

Easy to apply, high gloss topcoat with excellent durability and colour retention.

From £20.50

Hardtop AS has been discontinued and replaced by the superior Hardtop AX.

Call for prices

A two-pack glossy polyurethane topcoat with excellent gloss and colour retention. Suitable for brush/roll as well as spray application. Hardtop AX has good chemical resistance and can be used in aggressive atmospheric environments.

From £64.50

A two-pack acrylic-epoxy, isocyanate free topcoat with excellent gloss and colour retention.

From £64.50

Jotun Hardtop Flexi is a high solids, glossy two-pack polyurethane topcoat with good gloss and colour retention and excellent flexibility. Hardtop Flexi also has excellent impact resistance.

From £53.95

Hardtop HB is a satin finish two pack polyurethane topcoat with excellent colour retention.

From £45.00

Hardtop Optima is a two-pack isocyanate-free polysiloxane topcoat with outstanding gloss and colour retention. It is available in a wide range of colours and in various pack sizes. The best commercial topcoat available from Jotun.

From £129.95

Hardtop Smart Pack is a two component durable topcoat that combines excellent application properties by brush and roller with a 1:1 mixing ratio, simplifying application

From £99.75

Hardtop XP is a high volume solids, glossy two-pack polyurethane topcoat with excellent gloss and colour retention.

From £53.95

A 2-pack high build epoxy primer for use above or below the waterline, or as a build coat over Shield Surface Tolerant Epoxy Primer.

From £30.60

A 3 component epoxy coating giving the ultimate anti-skid surface. Suitable for primed metallic & concrete substrates. Approved to UK Defence Standard 80-134/1 for Royal Navy flight, hangar & weather decks. Can be used on helidecks, walkways, ramps, weigh bridge decks and decks in general where abrasion resistance and non-slip properties are required. Standard Comp B: 9 litre kit Wintergrade Comp B: 9.3 litre kit Available in several colours, all on Special order. See Manual, Data sheet & Application guide (under Guides tab below) for full details.

From £133.90

Jotacote Universal is a high build, abrasion resistant two-pack epoxy primer that can be applied at high film thickness. It can be used both as a primer and finish coat. NOW REPLACED BY JOTACOTE UNIVERSAL N10.

Call for prices

Excellent protection in less severe environments - Low film thickness version of Jotamastic 87. Available in off white, grey, black and red and with the inclusion of aluminium flakes in Aluminium and Aluminium red toned.

From £47.50

Wintergrade version for application below 10°C and faster curing times in normal conditions.

From £49.95

For severe environments and long lifetime. The original market leader in epoxy mastic technology. Available in off white, grey, black and red and with the inclusion of aluminium flakes in Aluminium and Aluminium red-toned.

From £56.75

Wintergrade version for application below 10°C and faster curing times in normal conditions.

From £56.75

Offers the longest lifetime in any environment. It has exceptional corrosion resistance, is surface tolerant and fast drying - greatly improving efficiency, It is also available in a wide range of colours.

From £59.50

Wintergrade version for application below 10°C and faster curing times in normal conditions.

From £59.50

A two pack solvent-free epoxy mastic coating, in a 14.67 litre pack. Specially designed for areas where optimum surface preparation is not possible. It is a high build product, and provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as a single coat system. Suitable for properly prepared carbon steel and aged coating surfaces. It is primarily designed for maintenance and repair, on areas such as outside hulls, exterior and interior areas, offshore environments including splash zones, refineries, bridges, buildings, and general structural steel. Well suited for early immersion. It is available in grey, red and off-white, in a 14.67 litre pack with Standard Comp B.

From £219.95

Jotamastic Smartpack is a two-pack surface tolerant high solids epoxy primer coat for use on steel. The aluminium version includes aluminium pigment for improved barrier effect.

From £99.95

A single pack coating that provides protection to steel exposed to extreme high and/or low temperatures. Jotatemp 650 can operate in dry temperatures ranging from cryogenic (-185°C) to above 650°C. Available in 5 Litre cans.

From £375.95

Easy to apply, low sheen topcoat with excellent durability and colour retention.

From £20.50

Cures underwater, the ideal primer for steel in splash zones & tidal areas, & wide colour choice when used as a topcoat.

Call for prices

Single pack polyurethane marine deck paint.

From £30.75

Penguard Express is a fast drying, two-pack epoxy primer which may be applied in high film thickness and at low temperatures. Suitable for use above the waterline.

From £42.75

Penguard Express MIO is a fast drying, high solids, two-pack epoxy coatings which can be applied at high film thicknesses and at low temperatures. It contains micaceous iron oxide for increased barrier effect.

From £47.25

Penguard Express ZP is a fast drying, high solids, two-pack epoxy coating system which can be applied at high film thicknesses and at lower temperatures.

From £47.25

Penguard FC is a high build, two-pack epoxy coating that can be used as a topcoat in an epoxy paint system or as a single coat system on steel and concrete.

From £47.25

Penguard HB is a high build, two-pack pure epoxy primer. It is ideal for application on GRP or gelcoat as it provides excellent waterproofing and will help prevent osmosis.

From £48.95

Penguard HSP is a fast drying, high solids two-pack epoxy coating. Penguard HSP provides corrosion protection to steel in an urban and industrial atmosphere.

From £152.50

A two-pack epoxy primer certified not to spread surface flame. It should be used as a first coat on aluminium and galvanised steel to ensure good paint adhesion. Available in 5 litre & 20 litre packs, including hardener.

From £44.95

Penguard Topcoat is a glossy pure epoxy topcoat. It should only be used in situations where there is limited exposure to Ultra Violet light or where cosmetic appearance over a period of time is not important.

From £57.50

Pilot ACR is a high build, quick drying acrylic topcoat. It can be applied as a single coat system or over a suitable primer and at temperatures as low as minus 15°C.

From £53.95

Pilot II is a glossy, single pack oil based topcoat for use above the waterline. Over a suitable primer it can be used on steel, wood or GRP.

From £36.75

An advanced waterborne acrylic emulsion coating for both interior & exterior use. It is fast-drying, and can be applied down to 10° C. It has a gloss finish, with very good gloss retention. It is certified not to spread surface flames, & meets the LEED v4 requirements for VOC content & emissions.

From £53.95

Jotun Pioner Topcoat is a single pack, semi-gloss, acrylic topcoat which is suitable for use both above and below the waterline.

From £30.00

Safeguard Universal ES is a two-component epoxy-vinyl coating that is ideal for use as a primer before the application of Jotun antifouling.

From £140.50

A 2-pack Polyurethane topcoat that keeps its colour for up to 10 years between re-coats.

From £24.50

Ultra Topcoat has been discontinued. An alternative product is Pilot ll.

Call for prices

A single pack primer with good adhesion to steel, aluminium and wood. Can be used as a matt topcoat. 2.5L pack size.

From £25.95

WaterFine Topcoat has been discontinued. An alternative product is Pilot WF.

Call for prices

 

What our customers say